§ 26.5-8. Procedures for compliance with this chapter.

(a)

Applications. Any individual applying for an electrical, building or use permit and intending to install outdoor lighting fixtures shall, as a part of said application, submit evidence to the city engineer that the proposed work will comply with the provisions of this chapter.

(b)

Contents of application or submission. The submission shall contain, but shall not necessarily be limited to the following (all or part of which may be part of or in addition to the information required elsewhere in the zoning regulations upon application for the required permit):

(1)

Plans indicating the location of the outdoor lighting fixture(s) on the premises and the type of illuminating devices, fixtures, lamps, supports, and other devices intended to be used.

(2)

Description of the illuminating devices, fixtures, lamps, supports and other devices, etc. This description shall include, but is not limited to, manufacturers' catalog cuts and/or drawings (including sections where required) and shall include detailed photometric data.

(3)

These plans and descriptions shall be sufficiently complete to enable the city engineer to determine whether compliance with the requirements of this chapter will be secured. If the city engineer is unable to make such a determination from the plans and descriptions, he may request the applicant to submit evidence of compliance by certified test reports as performed by a recognized testing laboratory. All test reports shall comply with procedures established by the American National Standards Institute (ANSI) and the Illuminating Engineering Society of North America (IES) for testing of luminaries.

(Ord. No. 1464, § 1, 12-9-86)